Git - api-trace2 Documentation

api-trace2 last updated in 2.47.0

The Trace2 API can be used to print debug, performance, and telemetry information to stderr or a file. The Trace2 feature is inactive unless explicitly enabled by enabling one or more Trace2 Targets.

The Trace2 API is intended to replace the existing (Trace1) printf-style tracing provided by the existing GIT_TRACE and GIT_TRACE_PERFORMANCE facilities. During initial implementation, Trace2 and Trace1 may operate in parallel.

The Trace2 API defines a set of high-level messages with known fields, such as (start: argv) and (exit: {exit-code, elapsed-time}).

Trace2 instrumentation throughout the Git code base sends Trace2 messages to the enabled Trace2 Targets. Targets transform these messages content into purpose-specific formats and write events to their data streams. In this manner, the Trace2 API can drive many different types of analysis.

Targets are defined using a VTable allowing easy extension to other formats in the future. This might be used to define a binary format, for example.

Trace2 is controlled using trace2.* config values in the system and global config files and GIT_TRACE2* environment variables. Trace2 does not read from repo local or worktree config files or respect -c command line config settings.

Trace2 Targets

Trace2 defines the following set of Trace2 Targets. Format details are given in a later section.

The Normal Format Target

The normal format target is a tradition printf format and similar to GIT_TRACE format. This format is enabled with the GIT_TRACE2 environment variable or the trace2.normalTarget system or global config setting.

For example

$ export GIT_TRACE2=~/log.normal
$ git version
git version 2.20.1.155.g426c96fcdb

$ git config --global trace2.normalTarget ~/log.normal
$ git version
git version 2.20.1.155.g426c96fcdb

yields

$ cat ~/log.normal
12:28:42.620009 common-main.c:38                  version 2.20.1.155.g426c96fcdb
12:28:42.620989 common-main.c:39                  start git version
12:28:42.621101 git.c:432                         cmd_name version (version)
12:28:42.621215 git.c:662                         exit elapsed:0.001227 code:0
12:28:42.621250 trace2/tr2_tgt_normal.c:124       atexit elapsed:0.001265 code:0

The Performance Format Target

The performance format target (PERF) is a column-based format to replace GIT_TRACE_PERFORMANCE and is suitable for development and testing, possibly to complement tools like gprof. This format is enabled with the GIT_TRACE2_PERF environment variable or the trace2.perfTarget system or global config setting.

For example

$ export GIT_TRACE2_PERF=~/log.perf
$ git version
git version 2.20.1.155.g426c96fcdb

$ git config --global trace2.perfTarget ~/log.perf
$ git version
git version 2.20.1.155.g426c96fcdb

yields

$ cat ~/log.perf
12:28:42.620675 common-main.c:38                  | d0 | main                     | version      |     |           |           |            | 2.20.1.155.g426c96fcdb
12:28:42.621001 common-main.c:39                  | d0 | main                     | start        |     |  0.001173 |           |            | git version
12:28:42.621111 git.c:432                         | d0 | main                     | cmd_name     |     |           |           |            | version (version)
12:28:42.621225 git.c:662                         | d0 | main                     | exit         |     |  0.001227 |           |            | code:0
12:28:42.621259 trace2/tr2_tgt_perf.c:211         | d0 | main                     | atexit       |     |  0.001265 |           |            | code:0

The Event Format Target

The event format target is a JSON-based format of event data suitable for telemetry analysis. This format is enabled with the GIT_TRACE2_EVENT environment variable or the trace2.eventTarget system or global config setting.

For example

$ export GIT_TRACE2_EVENT=~/log.event
$ git version
git version 2.20.1.155.g426c96fcdb

$ git config --global trace2.eventTarget ~/log.event
$ git version
git version 2.20.1.155.g426c96fcdb

yields

$ cat ~/log.event
{"event":"version","sid":"sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.620713Z","file":"common-main.c","line":38,"evt":"2","exe":"2.20.1.155.g426c96fcdb"}
{"event":"start","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621027Z","file":"common-main.c","line":39,"t_abs":0.001173,"argv":["git","version"]}
{"event":"cmd_name","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621122Z","file":"git.c","line":432,"name":"version","hierarchy":"version"}
{"event":"exit","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621236Z","file":"git.c","line":662,"t_abs":0.001227,"code":0}
{"event":"atexit","sid":"20190408T191610.507018Z-H9b68c35f-P000059a8","thread":"main","time":"2019-01-16T17:28:42.621268Z","file":"trace2/tr2_tgt_event.c","line":163,"t_abs":0.001265,"code":0}

Enabling a Target

To enable a target, set the corresponding environment variable or system or global config value to one of the following:

0 or false - Disables the target.
1 or true - Writes to STDERR.
[2-9] - Writes to the already opened file descriptor.
<absolute-pathname> - Writes to the file in append mode. If the target already exists and is a directory, the traces will be written to files (one per process) underneath the given directory.
af_unix:[<socket_type>:]<absolute-pathname> - Write to a Unix DomainSocket (on platforms that support them). Socket type can be either stream or dgram; if omitted Git will try both.

When trace files are written to a target directory, they will be named according to the last component of the SID (optionally followed by a counter to avoid filename collisions).

Trace2 API

All public Trace2 functions and macros are defined in trace2.h and trace2.c. All public symbols are prefixed with trace2_.

There are no public Trace2 data structures.

The Trace2 code also defines a set of private functions and data types in the trace2/ directory. These symbols are prefixed with tr2_ and should only be used by functions in trace2.c.

Conventions for Public Functions and Macros

The functions defined by the Trace2 API are declared and documented in trace2.h. It defines the API functions and wrapper macros for Trace2.

Some functions have a _fl() suffix to indicate that they take file and line-number arguments.

Some functions have a _va_fl() suffix to indicate that they also take a va_list argument.

Some functions have a _printf_fl() suffix to indicate that they also take a varargs argument.

There are CPP wrapper macros and ifdefs to hide most of these details. See trace2.h for more details. The following discussion will only describe the simplified forms.

Public API

All Trace2 API functions send a message to all of the active Trace2 Targets. This section describes the set of available messages.

It helps to divide these functions into groups for discussion purposes.

Basic Command Messages

These are concerned with the lifetime of the overall git process. e.g: void trace2_initialize_clock(), void trace2_initialize(), int trace2_is_enabled(), void trace2_cmd_start(int argc, const char **argv).

Command Detail Messages

These are concerned with describing the specific Git command after the command line, config, and environment are inspected. e.g: void trace2_cmd_name(const char *name), void trace2_cmd_mode(const char *mode).

Child Process Messages

These are concerned with the various spawned child processes, including shell scripts, git commands, editors, pagers, and hooks.

e.g: void trace2_child_start(struct child_process *cmd).

Git Thread Messages

These messages are concerned with Git thread usage.

e.g: void trace2_thread_start(const char *thread_name).

Region and Data Messages

These are concerned with recording performance data over regions or spans of code. e.g: void trace2_region_enter(const char *category, const char *label, const struct repository *repo).

Refer to trace2.h for details about all trace2 functions.

Trace2 Target Formats

NORMAL Format

Events are written as lines of the form:

[<time> SP <filename>:<line> SP+] <event-name> [[SP] <event-message>] LF

<event-name>: is the event name.
<event-message>: is a free-form printf message intended for human consumption.

Note that this may contain embedded LF or CRLF characters that are not escaped, so the event may spill across multiple lines.

If GIT_TRACE2_BRIEF or trace2.normalBrief is true, the time, filename, and line fields are omitted.

This target is intended to be more of a summary (like GIT_TRACE) and less detailed than the other targets. It ignores thread, region, and data messages, for example.

PERF Format

Events are written as lines of the form:

[<time> SP <filename>:<line> SP+
    BAR SP] d<depth> SP
    BAR SP <thread-name> SP+
    BAR SP <event-name> SP+
    BAR SP [r<repo-id>] SP+
    BAR SP [<t_abs>] SP+
    BAR SP [<t_rel>] SP+
    BAR SP [<category>] SP+
    BAR SP DOTS* <perf-event-message>
    LF

<depth>: is the git process depth. This is the number of parent git processes. A top-level git command has depth value "d0". A child of it has depth value "d1". A second level child has depth value "d2" and so on.
<thread-name>: is a unique name for the thread. The primary thread is called "main". Other thread names are of the form "th%d:%s" and include a unique number and the name of the thread-proc.
<event-name>: is the event name.
<repo-id>: when present, is a number indicating the repository in use. A def_repo event is emitted when a repository is opened. This defines the repo-id and associated worktree. Subsequent repo-specific events will reference this repo-id.

Currently, this is always "r1" for the main repository. This field is in anticipation of in-proc submodules in the future.
<t_abs>: when present, is the absolute time in seconds since the program started.
<t_rel>: when present, is time in seconds relative to the start of the current region. For a thread-exit event, it is the elapsed time of the thread.
<category>: is present on region and data events and is used to indicate a broad category, such as "index" or "status".
<perf-event-message>: is a free-form printf message intended for human consumption.

15:33:33.532712 wt-status.c:2310                  | d0 | main                     | region_enter | r1  |  0.126064 |           | status     | label:print
15:33:33.532712 wt-status.c:2331                  | d0 | main                     | region_leave | r1  |  0.127568 |  0.001504 | status     | label:print

If GIT_TRACE2_PERF_BRIEF or trace2.perfBrief is true, the time, file, and line fields are omitted.

d0 | main                     | region_leave | r1  |  0.011717 |  0.009122 | index      | label:preload

The PERF target is intended for interactive performance analysis during development and is quite noisy.

EVENT Format

Each event is a JSON-object containing multiple key/value pairs written as a single line and followed by a LF.

'{' <key> ':' <value> [',' <key> ':' <value>]* '}' LF

Some key/value pairs are common to all events and some are event-specific.

Common Key/Value Pairs

The following key/value pairs are common to all events:

{
	"event":"version",
	"sid":"20190408T191827.272759Z-H9b68c35f-P00003510",
	"thread":"main",
	"time":"2019-04-08T19:18:27.282761Z",
	"file":"common-main.c",
	"line":42,
	...
}

"event":<event>: is the event name.
"sid":<sid>: is the session-id. This is a unique string to identify the process instance to allow all events emitted by a process to be identified. A session-id is used instead of a PID because PIDs are recycled by the OS. For child git processes, the session-id is prepended with the session-id of the parent git process to allow parent-child relationships to be identified during post-processing.
"thread":<thread>: is the thread name.
"time":<time>: is the UTC time of the event.
"file":<filename>: is source file generating the event.
"line":<line-number>: is the integer source line number generating the event.
"repo":<repo-id>: when present, is the integer repo-id as described previously.

If GIT_TRACE2_EVENT_BRIEF or trace2.eventBrief is true, the file and line fields are omitted from all events and the time field is only present on the "start" and "atexit" events.

Event-Specific Key/Value Pairs

"version"

This event gives the version of the executable and the EVENT format. It should always be the first event in a trace session. The EVENT format version will be incremented if new event types are added, if existing fields are removed, or if there are significant changes in interpretation of existing events or fields. Smaller changes, such as adding a new field to an existing event, will not require an increment to the EVENT format version.

{
	"event":"version",
	...
	"evt":"2",		       # EVENT format version
	"exe":"2.20.1.155.g426c96fcdb" # git version
}

"discard"

This event is written to the git-trace2-discard sentinel file if there are too many files in the target trace directory (see the trace2.maxFiles config option).

{
	"event":"discard",
	...
}

"start"

This event contains the complete argv received by main().

{
	"event":"start",
	...
	"t_abs":0.001227, # elapsed time in seconds
	"argv":["git","version"]
}

"exit"

This event is emitted when git calls exit().

{
	"event":"exit",
	...
	"t_abs":0.001227, # elapsed time in seconds
	"code":0	  # exit code
}

"atexit"

This event is emitted by the Trace2 atexit routine during final shutdown. It should be the last event emitted by the process.

(The elapsed time reported here is greater than the time reported in the "exit" event because it runs after all other atexit tasks have completed.)

{
	"event":"atexit",
	...
	"t_abs":0.001227, # elapsed time in seconds
	"code":0          # exit code
}

"signal"

This event is emitted when the program is terminated by a user signal. Depending on the platform, the signal event may prevent the "atexit" event from being generated.

{
	"event":"signal",
	...
	"t_abs":0.001227,  # elapsed time in seconds
	"signo":13         # SIGTERM, SIGINT, etc.
}

"error"

This event is emitted when one of the error(), die(), warning(), or usage() functions are called.

{
	"event":"error",
	...
	"msg":"invalid option: --cahced", # formatted error message
	"fmt":"invalid option: %s"	  # error format string
}

The error event may be emitted more than once. The format string allows post-processors to group errors by type without worrying about specific error arguments.

"cmd_path"

This event contains the discovered full path of the git executable (on platforms that are configured to resolve it).

{
	"event":"cmd_path",
	...
	"path":"C:/work/gfw/git.exe"
}

"cmd_name"

This event contains the command name for this git process and the hierarchy of commands from parent git processes.

{
	"event":"cmd_name",
	...
	"name":"pack-objects",
	"hierarchy":"push/pack-objects"
}

Normally, the "name" field contains the canonical name of the command. When a canonical name is not available, one of these special values are used:

"_query_"            # "git --html-path"
"_run_dashed_"       # when "git foo" tries to run "git-foo"
"_run_shell_alias_"  # alias expansion to a shell command
"_run_git_alias_"    # alias expansion to a git command
"_usage_"            # usage error

"cmd_mode"

This event, when present, describes the command variant This event may be emitted more than once.

{
	"event":"cmd_mode",
	...
	"name":"branch"
}

The "name" field is an arbitrary string to describe the command mode. For example, checkout can checkout a branch or an individual file. And these variations typically have different performance characteristics that are not comparable.

"alias"

This event is present when an alias is expanded.

{
	"event":"alias",
	...
	"alias":"l",		 # registered alias
	"argv":["log","--graph"] # alias expansion
}

"child_start"

This event describes a child process that is about to be spawned.

{
	"event":"child_start",
	...
	"child_id":2,
	"child_class":"?",
	"use_shell":false,
	"argv":["git","rev-list","--objects","--stdin","--not","--all","--quiet"]

	"hook_name":"<hook_name>"  # present when child_class is "hook"
	"cd":"<path>"		   # present when cd is required
}

The "child_id" field can be used to match this child_start with the corresponding child_exit event.

The "child_class" field is a rough classification, such as "editor", "pager", "transport/*", and "hook". Unclassified children are classified with "?".

"child_exit"

This event is generated after the current process has returned from the waitpid() and collected the exit information from the child.

{
	"event":"child_exit",
	...
	"child_id":2,
	"pid":14708,	 # child PID
	"code":0,	 # child exit-code
	"t_rel":0.110605 # observed run-time of child process
}

Note that the session-id of the child process is not available to the current/spawning process, so the child’s PID is reported here as a hint for post-processing. (But it is only a hint because the child process may be a shell script which doesn’t have a session-id.)

Note that the t_rel field contains the observed run time in seconds for the child process (starting before the fork/exec/spawn and stopping after the waitpid() and includes OS process creation overhead). So this time will be slightly larger than the atexit time reported by the child process itself.

"exec"

This event is generated before git attempts to exec() another command rather than starting a child process.

{
	"event":"exec",
	...
	"exec_id":0,
	"exe":"git",
	"argv":["foo", "bar"]
}

The "exec_id" field is a command-unique id and is only useful if the exec() fails and a corresponding exec_result event is generated.

"exec_result"

This event is generated if the exec() fails and control returns to the current git command.

{
	"event":"exec_result",
	...
	"exec_id":0,
	"code":1      # error code (errno) from exec()
}

"thread_start"

This event is generated when a thread is started. It is generated from within the new thread’s thread-proc (for TLS reasons).

{
	"event":"thread_start",
	...
	"thread":"th02:preload_thread" # thread name
}

"thread_exit"

This event is generated when a thread exits. It is generated from within the thread’s thread-proc (for TLS reasons).

{
	"event":"thread_exit",
	...
	"thread":"th02:preload_thread", # thread name
	"t_rel":0.007328                # thread elapsed time
}

"def_param"

This event is generated to log a global parameter, such as a config setting, command-line flag, or environment variable.

{
	"event":"def_param",
	...
	"param":"core.abbrev",
	"value":"7"
}

"def_repo"

This event defines a repo-id and associates it with the root of the worktree.

{
	"event":"def_repo",
	...
	"repo":1,
	"worktree":"/Users/jeffhost/work/gfw"
}

As stated earlier, the repo-id is currently always 1, so there will only be one def_repo event. Later, if in-proc submodules are supported, a def_repo event should be emitted for each submodule visited.

"region_enter"

This event is generated when entering a region.

{
	"event":"region_enter",
	...
	"repo":1,                # optional
	"nesting":1,             # current region stack depth
	"category":"index",      # optional
	"label":"do_read_index", # optional
	"msg":".git/index"       # optional
}

The category field may be used in a future enhancement to do category-based filtering.

GIT_TRACE2_EVENT_NESTING or trace2.eventNesting can be used to filter deeply nested regions and data events. It defaults to "2".

"region_leave"

This event is generated when leaving a region.

{
	"event":"region_leave",
	...
	"repo":1,                # optional
	"t_rel":0.002876,        # time spent in region in seconds
	"nesting":1,             # region stack depth
	"category":"index",      # optional
	"label":"do_read_index", # optional
	"msg":".git/index"       # optional
}

"data"

This event is generated to log a thread- and region-local key/value pair.

{
	"event":"data",
	...
	"repo":1,              # optional
	"t_abs":0.024107,      # absolute elapsed time
	"t_rel":0.001031,      # elapsed time in region/thread
	"nesting":2,           # region stack depth
	"category":"index",
	"key":"read/cache_nr",
	"value":"3552"
}

The "value" field may be an integer or a string.

"data-json"

This event is generated to log a pre-formatted JSON string containing structured data.

{
	"event":"data_json",
	...
	"repo":1,              # optional
	"t_abs":0.015905,
	"t_rel":0.015905,
	"nesting":1,
	"category":"process",
	"key":"windows/ancestry",
	"value":["bash.exe","bash.exe"]
}

Example Trace2 API Usage

Here is a hypothetical usage of the Trace2 API showing the intended usage (without worrying about the actual Git details).

Initialization

Initialization happens in main(). Behind the scenes, an atexit and signal handler are registered.

int main(int argc, const char **argv)
{
	int exit_code;

	trace2_initialize();
	trace2_cmd_start(argv);

	exit_code = cmd_main(argc, argv);

	trace2_cmd_exit(exit_code);

	return exit_code;
}

Command Details

After the basics are established, additional command information can be sent to Trace2 as it is discovered.

int cmd_checkout(int argc, const char **argv)
{
	trace2_cmd_name("checkout");
	trace2_cmd_mode("branch");
	trace2_def_repo(the_repository);

	// emit "def_param" messages for "interesting" config settings.
	trace2_cmd_list_config();

	if (do_something())
	    trace2_cmd_error("Path '%s': cannot do something", path);

	return 0;
}

Child Processes

Wrap code spawning child processes.

void run_child(...)
{
	int child_exit_code;
	struct child_process cmd = CHILD_PROCESS_INIT;
	...
	cmd.trace2_child_class = "editor";

	trace2_child_start(&cmd);
	child_exit_code = spawn_child_and_wait_for_it();
	trace2_child_exit(&cmd, child_exit_code);
}

For example, the following fetch command spawned ssh, index-pack, rev-list, and gc. This example also shows that fetch took 5.199 seconds and of that 4.932 was in ssh.

$ export GIT_TRACE2_BRIEF=1
$ export GIT_TRACE2=~/log.normal
$ git fetch origin
...

$ cat ~/log.normal
version 2.20.1.vfs.1.1.47.g534dbe1ad1
start git fetch origin
worktree /Users/jeffhost/work/gfw
cmd_name fetch (fetch)
child_start[0] ssh git@github.com ...
child_start[1] git index-pack ...
... (Trace2 events from child processes omitted)
child_exit[1] pid:14707 code:0 elapsed:0.076353
child_exit[0] pid:14706 code:0 elapsed:4.931869
child_start[2] git rev-list ...
... (Trace2 events from child process omitted)
child_exit[2] pid:14708 code:0 elapsed:0.110605
child_start[3] git gc --auto
... (Trace2 events from child process omitted)
child_exit[3] pid:14709 code:0 elapsed:0.006240
exit elapsed:5.198503 code:0
atexit elapsed:5.198541 code:0

When a git process is a (direct or indirect) child of another git process, it inherits Trace2 context information. This allows the child to print the command hierarchy. This example shows gc as child[3] of fetch. When the gc process reports its name as "gc", it also reports the hierarchy as "fetch/gc". (In this example, trace2 messages from the child process is indented for clarity.)

$ export GIT_TRACE2_BRIEF=1
$ export GIT_TRACE2=~/log.normal
$ git fetch origin
...

$ cat ~/log.normal
version 2.20.1.160.g5676107ecd.dirty
start git fetch official
worktree /Users/jeffhost/work/gfw
cmd_name fetch (fetch)
...
child_start[3] git gc --auto
    version 2.20.1.160.g5676107ecd.dirty
    start /Users/jeffhost/work/gfw/git gc --auto
    worktree /Users/jeffhost/work/gfw
    cmd_name gc (fetch/gc)
    exit elapsed:0.001959 code:0
    atexit elapsed:0.001997 code:0
child_exit[3] pid:20303 code:0 elapsed:0.007564
exit elapsed:3.868938 code:0
atexit elapsed:3.868970 code:0

Regions

Regions can be use to time an interesting section of code.

void wt_status_collect(struct wt_status *s)
{
	trace2_region_enter("status", "worktrees", s->repo);
	wt_status_collect_changes_worktree(s);
	trace2_region_leave("status", "worktrees", s->repo);

	trace2_region_enter("status", "index", s->repo);
	wt_status_collect_changes_index(s);
	trace2_region_leave("status", "index", s->repo);

	trace2_region_enter("status", "untracked", s->repo);
	wt_status_collect_untracked(s);
	trace2_region_leave("status", "untracked", s->repo);
}

void wt_status_print(struct wt_status *s)
{
	trace2_region_enter("status", "print", s->repo);
	switch (s->status_format) {
	    ...
	}
	trace2_region_leave("status", "print", s->repo);
}

In this example, scanning for untracked files ran from +0.012568 to +0.027149 (since the process started) and took 0.014581 seconds.

$ export GIT_TRACE2_PERF_BRIEF=1
$ export GIT_TRACE2_PERF=~/log.perf
$ git status
...

$ cat ~/log.perf
d0 | main                     | version      |     |           |           |            | 2.20.1.160.g5676107ecd.dirty
d0 | main                     | start        |     |  0.001173 |           |            | git status
d0 | main                     | def_repo     | r1  |           |           |            | worktree:/Users/jeffhost/work/gfw
d0 | main                     | cmd_name     |     |           |           |            | status (status)
...
d0 | main                     | region_enter | r1  |  0.010988 |           | status     | label:worktrees
d0 | main                     | region_leave | r1  |  0.011236 |  0.000248 | status     | label:worktrees
d0 | main                     | region_enter | r1  |  0.011260 |           | status     | label:index
d0 | main                     | region_leave | r1  |  0.012542 |  0.001282 | status     | label:index
d0 | main                     | region_enter | r1  |  0.012568 |           | status     | label:untracked
d0 | main                     | region_leave | r1  |  0.027149 |  0.014581 | status     | label:untracked
d0 | main                     | region_enter | r1  |  0.027411 |           | status     | label:print
d0 | main                     | region_leave | r1  |  0.028741 |  0.001330 | status     | label:print
d0 | main                     | exit         |     |  0.028778 |           |            | code:0
d0 | main                     | atexit       |     |  0.028809 |           |            | code:0

Regions may be nested. This causes messages to be indented in the PERF target, for example. Elapsed times are relative to the start of the corresponding nesting level as expected. For example, if we add region message to:

static enum path_treatment read_directory_recursive(struct dir_struct *dir,
	struct index_state *istate, const char *base, int baselen,
	struct untracked_cache_dir *untracked, int check_only,
	int stop_at_first_file, const struct pathspec *pathspec)
{
	enum path_treatment state, subdir_state, dir_state = path_none;

	trace2_region_enter_printf("dir", "read_recursive", NULL, "%.*s", baselen, base);
	...
	trace2_region_leave_printf("dir", "read_recursive", NULL, "%.*s", baselen, base);
	return dir_state;
}

We can further investigate the time spent scanning for untracked files.

$ export GIT_TRACE2_PERF_BRIEF=1
$ export GIT_TRACE2_PERF=~/log.perf
$ git status
...
$ cat ~/log.perf
d0 | main                     | version      |     |           |           |            | 2.20.1.162.gb4ccea44db.dirty
d0 | main                     | start        |     |  0.001173 |           |            | git status
d0 | main                     | def_repo     | r1  |           |           |            | worktree:/Users/jeffhost/work/gfw
d0 | main                     | cmd_name     |     |           |           |            | status (status)
...
d0 | main                     | region_enter | r1  |  0.015047 |           | status     | label:untracked
d0 | main                     | region_enter |     |  0.015132 |           | dir        | ..label:read_recursive
d0 | main                     | region_enter |     |  0.016341 |           | dir        | ....label:read_recursive vcs-svn/
d0 | main                     | region_leave |     |  0.016422 |  0.000081 | dir        | ....label:read_recursive vcs-svn/
d0 | main                     | region_enter |     |  0.016446 |           | dir        | ....label:read_recursive xdiff/
d0 | main                     | region_leave |     |  0.016522 |  0.000076 | dir        | ....label:read_recursive xdiff/
d0 | main                     | region_enter |     |  0.016612 |           | dir        | ....label:read_recursive git-gui/
d0 | main                     | region_enter |     |  0.016698 |           | dir        | ......label:read_recursive git-gui/po/
d0 | main                     | region_enter |     |  0.016810 |           | dir        | ........label:read_recursive git-gui/po/glossary/
d0 | main                     | region_leave |     |  0.016863 |  0.000053 | dir        | ........label:read_recursive git-gui/po/glossary/
...
d0 | main                     | region_enter |     |  0.031876 |           | dir        | ....label:read_recursive builtin/
d0 | main                     | region_leave |     |  0.032270 |  0.000394 | dir        | ....label:read_recursive builtin/
d0 | main                     | region_leave |     |  0.032414 |  0.017282 | dir        | ..label:read_recursive
d0 | main                     | region_leave | r1  |  0.032454 |  0.017407 | status     | label:untracked
...
d0 | main                     | exit         |     |  0.034279 |           |            | code:0
d0 | main                     | atexit       |     |  0.034322 |           |            | code:0

Trace2 regions are similar to the existing trace_performance_enter() and trace_performance_leave() routines, but are thread safe and maintain per-thread stacks of timers.

Data Messages

Data messages added to a region.

int read_index_from(struct index_state *istate, const char *path,
	const char *gitdir)
{
	trace2_region_enter_printf("index", "do_read_index", the_repository, "%s", path);

	...

	trace2_data_intmax("index", the_repository, "read/version", istate->version);
	trace2_data_intmax("index", the_repository, "read/cache_nr", istate->cache_nr);

	trace2_region_leave_printf("index", "do_read_index", the_repository, "%s", path);
}

This example shows that the index contained 3552 entries.

$ export GIT_TRACE2_PERF_BRIEF=1
$ export GIT_TRACE2_PERF=~/log.perf
$ git status
...
$ cat ~/log.perf
d0 | main                     | version      |     |           |           |            | 2.20.1.156.gf9916ae094.dirty
d0 | main                     | start        |     |  0.001173 |           |            | git status
d0 | main                     | def_repo     | r1  |           |           |            | worktree:/Users/jeffhost/work/gfw
d0 | main                     | cmd_name     |     |           |           |            | status (status)
d0 | main                     | region_enter | r1  |  0.001791 |           | index      | label:do_read_index .git/index
d0 | main                     | data         | r1  |  0.002494 |  0.000703 | index      | ..read/version:2
d0 | main                     | data         | r1  |  0.002520 |  0.000729 | index      | ..read/cache_nr:3552
d0 | main                     | region_leave | r1  |  0.002539 |  0.000748 | index      | label:do_read_index .git/index
...

Thread Events

Thread messages added to a thread-proc.

For example, the multithreaded preload-index code can be instrumented with a region around the thread pool and then per-thread start and exit events within the threadproc.

static void *preload_thread(void *_data)
{
	// start the per-thread clock and emit a message.
	trace2_thread_start("preload_thread");

	// report which chunk of the array this thread was assigned.
	trace2_data_intmax("index", the_repository, "offset", p->offset);
	trace2_data_intmax("index", the_repository, "count", nr);

	do {
	    ...
	} while (--nr > 0);
	...

	// report elapsed time taken by this thread.
	trace2_thread_exit();
	return NULL;
}

void preload_index(struct index_state *index,
	const struct pathspec *pathspec,
	unsigned int refresh_flags)
{
	trace2_region_enter("index", "preload", the_repository);

	for (i = 0; i < threads; i++) {
	    ... /* create thread */
	}

	for (i = 0; i < threads; i++) {
	    ... /* join thread */
	}

	trace2_region_leave("index", "preload", the_repository);
}

In this example preload_index() was executed by the main thread and started the preload region. Seven threads, named th01:preload_thread through th07:preload_thread, were started. Events from each thread are atomically appended to the shared target stream as they occur so they may appear in random order with respect other threads. Finally, the main thread waits for the threads to finish and leaves the region.

Data events are tagged with the active thread name. They are used to report the per-thread parameters.

$ export GIT_TRACE2_PERF_BRIEF=1
$ export GIT_TRACE2_PERF=~/log.perf
$ git status
...
$ cat ~/log.perf
...
d0 | main                     | region_enter | r1  |  0.002595 |           | index      | label:preload
d0 | th01:preload_thread      | thread_start |     |  0.002699 |           |            |
d0 | th02:preload_thread      | thread_start |     |  0.002721 |           |            |
d0 | th01:preload_thread      | data         | r1  |  0.002736 |  0.000037 | index      | offset:0
d0 | th02:preload_thread      | data         | r1  |  0.002751 |  0.000030 | index      | offset:2032
d0 | th03:preload_thread      | thread_start |     |  0.002711 |           |            |
d0 | th06:preload_thread      | thread_start |     |  0.002739 |           |            |
d0 | th01:preload_thread      | data         | r1  |  0.002766 |  0.000067 | index      | count:508
d0 | th06:preload_thread      | data         | r1  |  0.002856 |  0.000117 | index      | offset:2540
d0 | th03:preload_thread      | data         | r1  |  0.002824 |  0.000113 | index      | offset:1016
d0 | th04:preload_thread      | thread_start |     |  0.002710 |           |            |
d0 | th02:preload_thread      | data         | r1  |  0.002779 |  0.000058 | index      | count:508
d0 | th06:preload_thread      | data         | r1  |  0.002966 |  0.000227 | index      | count:508
d0 | th07:preload_thread      | thread_start |     |  0.002741 |           |            |
d0 | th07:preload_thread      | data         | r1  |  0.003017 |  0.000276 | index      | offset:3048
d0 | th05:preload_thread      | thread_start |     |  0.002712 |           |            |
d0 | th05:preload_thread      | data         | r1  |  0.003067 |  0.000355 | index      | offset:1524
d0 | th05:preload_thread      | data         | r1  |  0.003090 |  0.000378 | index      | count:508
d0 | th07:preload_thread      | data         | r1  |  0.003037 |  0.000296 | index      | count:504
d0 | th03:preload_thread      | data         | r1  |  0.002971 |  0.000260 | index      | count:508
d0 | th04:preload_thread      | data         | r1  |  0.002983 |  0.000273 | index      | offset:508
d0 | th04:preload_thread      | data         | r1  |  0.007311 |  0.004601 | index      | count:508
d0 | th05:preload_thread      | thread_exit  |     |  0.008781 |  0.006069 |            |
d0 | th01:preload_thread      | thread_exit  |     |  0.009561 |  0.006862 |            |
d0 | th03:preload_thread      | thread_exit  |     |  0.009742 |  0.007031 |            |
d0 | th06:preload_thread      | thread_exit  |     |  0.009820 |  0.007081 |            |
d0 | th02:preload_thread      | thread_exit  |     |  0.010274 |  0.007553 |            |
d0 | th07:preload_thread      | thread_exit  |     |  0.010477 |  0.007736 |            |
d0 | th04:preload_thread      | thread_exit  |     |  0.011657 |  0.008947 |            |
d0 | main                     | region_leave | r1  |  0.011717 |  0.009122 | index      | label:preload
...
d0 | main                     | exit         |     |  0.029996 |           |            | code:0
d0 | main                     | atexit       |     |  0.030027 |           |            | code:0

In this example, the preload region took 0.009122 seconds. The 7 threads took between 0.006069 and 0.008947 seconds to work on their portion of the index. Thread "th01" worked on 508 items at offset 0. Thread "th02" worked on 508 items at offset 2032. Thread "th04" worked on 508 items at offset 508.

This example also shows that thread names are assigned in a racy manner as each thread starts and allocates TLS storage.

Future Work

Relationship to the Existing Trace Api (api-trace.txt)

There are a few issues to resolve before we can completely switch to Trace2.

Updating existing tests that assume GIT_TRACE format messages.
How to best handle custom GIT_TRACE_<key> messages?
- The GIT_TRACE_<key> mechanism allows each <key> to write to a different file (in addition to just stderr).
- Do we want to maintain that ability or simply write to the existing Trace2 targets (and convert <key> to a "category").

Setup and Config

Getting and Creating Projects

Basic Snapshotting

Branching and Merging

Sharing and Updating Projects

Inspection and Comparison

Patching

Debugging

Email

External Systems

Server Admin

Guides

Administration

Plumbing Commands

Trace2 Targets

The Normal Format Target

The Performance Format Target

The Event Format Target

Enabling a Target

Trace2 API

Conventions for Public Functions and Macros

Public API

Basic Command Messages

Command Detail Messages

Child Process Messages

Git Thread Messages

Region and Data Messages

Trace2 Target Formats

NORMAL Format

PERF Format

EVENT Format

Common Key/Value Pairs

Event-Specific Key/Value Pairs

Example Trace2 API Usage

Future Work

Relationship to the Existing Trace Api (api-trace.txt)