Limit the number of commits to output.

Skip number commits before starting to show the commit output.

Show commits more recent than a specific date.

Show all commits more recent than a specific date. This visits all commits in the range, rather than stopping at the first commit which is older than a specific date.

Show commits older than a specific date.

Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression). With more than one --author=<pattern>, commits whose author matches any of the given patterns are chosen (similarly for multiple --committer=<pattern>).

Limit the commits output to ones with reflog entries that match the specified pattern (regular expression). With more than one --grep-reflog, commits whose reflog message matches any of the given patterns are chosen. It is an error to use this option unless --walk-reflogs is in use.

Limit the commits output to ones with log message that matches the specified pattern (regular expression). With more than one --grep=<pattern>, commits whose message matches any of the given patterns are chosen (but see --all-match).

Limit the commits output to ones that match all given --grep, instead of ones that match at least one.

Limit the commits output to ones with log message that do not match the pattern specified with --grep=<pattern>.

Match the regular expression limiting patterns without regard to letter case.

Consider the limiting patterns to be basic regular expressions; this is the default.

Consider the limiting patterns to be extended regular expressions instead of the default basic regular expressions.

Consider the limiting patterns to be fixed strings (don’t interpret pattern as a regular expression).

Consider the limiting patterns to be Perl-compatible regular expressions.

Stop when a given path disappears from the tree.

Print only merge commits. This is exactly the same as --min-parents=2.

Do not print commits with more than one parent. This is exactly the same as --max-parents=1.

Show only commits which have at least (or at most) that many parent commits. In particular, --max-parents=1 is the same as --no-merges, --min-parents=2 is the same as --merges. --max-parents=0 gives all root commits and --min-parents=3 all octopus merges.

When finding commits to include, follow only the first parent commit upon seeing a merge commit. This option can give a better overview when viewing the evolution of a particular topic branch, because merges into a topic branch tend to be only about adjusting to updated upstream from time to time, and this option allows you to ignore the individual commits brought in to your history by such a merge.

When finding commits to exclude (with a ^), follow only the first parent commit upon seeing a merge commit. This can be used to find the set of changes in a topic branch from the point where it diverged from the remote branch, given that arbitrary merges can be valid topic branch changes.

Reverses the meaning of the ^ prefix (or lack thereof) for all following revision specifiers, up to the next --not.

Pretend as if all the refs in refs/, along with HEAD, are listed on the command line as <commit>.

Pretend as if all the refs in refs/heads are listed on the command line as <commit>. If <pattern> is given, limit branches to ones matching given shell glob. If pattern lacks ?, *, or [, /* at the end is implied.

Pretend as if all the refs in refs/tags are listed on the command line as <commit>. If <pattern> is given, limit tags to ones matching given shell glob. If pattern lacks ?, *, or [, /* at the end is implied.

Pretend as if all the refs in refs/remotes are listed on the command line as <commit>. If <pattern> is given, limit remote-tracking branches to ones matching given shell glob. If pattern lacks ?, *, or [, /* at the end is implied.

Pretend as if all the refs matching shell glob <glob-pattern> are listed on the command line as <commit>. Leading refs/, is automatically prepended if missing. If pattern lacks ?, *, or [, /* at the end is implied.

Do not include refs matching <glob-pattern> that the next --all, --branches, --tags, --remotes, or --glob would otherwise consider. Repetitions of this option accumulate exclusion patterns up to the next --all, --branches, --tags, --remotes, or --glob option (other options or arguments do not clear accumulated patterns).

Do not include refs that would be hidden by git-receive-pack or git-upload-pack by consulting the appropriate receive.hideRefs or uploadpack.hideRefs configuration along with transfer.hideRefs (see git-config[1]). This option affects the next pseudo-ref option --all or --glob and is cleared after processing them.

Pretend as if all objects mentioned by reflogs are listed on the command line as <commit>.

Pretend as if all objects mentioned as ref tips of alternate repositories were listed on the command line. An alternate repository is any repository whose object directory is specified in objects/info/alternates. The set of included objects may be modified by core.alternateRefsCommand, etc. See git-config[1].

By default, all working trees will be examined by the following options when there are more than one (see git-worktree[1]): --all, --reflog and --indexed-objects. This option forces them to examine the current working tree only.

Upon seeing an invalid object name in the input, pretend as if the bad input was not given.

Pretend as if the bad bisection ref refs/bisect/bad was listed and as if it was followed by --not and the good bisection refs refs/bisect/good-* on the command line.

In addition to the <commit> listed on the command line, read them from the standard input. If a -- separator is seen, stop reading commits and start reading paths to limit the result.

Like --cherry-pick (see below) but mark equivalent commits with = rather than omitting them, and inequivalent ones with +.

Omit any commit that introduces the same change as another commit on the “other side” when the set of commits are limited with symmetric difference.

List only commits on the respective side of a symmetric difference, i.e. only those which would be marked < resp. > by --left-right.

A synonym for --right-only --cherry-mark --no-merges; useful to limit the output to the commits on our side and mark those that have been applied to the other side of a forked history with git log --cherry upstream...mybranch, similar to git cherry upstream mybranch.

Instead of walking the commit ancestry chain, walk reflog entries from the most recent one to older ones. When this option is used you cannot specify commits to exclude (that is, ^commit, commit1..commit2, and commit1...commit2 notations cannot be used).

After a failed merge, show refs that touch files having a conflict and don’t exist on all heads to merge.

Output excluded boundary commits. Boundary commits are prefixed with -.

Commits modifying the given <paths> are selected.

Commits that are referred by some branch or tag are selected.

Simplifies the history to the simplest history explaining the final state of the tree. Simplest because it prunes some side branches if the end result is the same (i.e. merging branches with the same content)

Include all commits from the default mode, but also any merge commits that are not TREESAME to the first parent but are TREESAME to a later parent. This mode is helpful for showing the merge commits that "first introduced" a change to a branch.

Same as the default mode, but does not prune some history.

Only the selected commits are shown, plus some to have a meaningful history.

All commits in the simplified history are shown.

Additional option to --full-history to remove some needless merges from the resulting history, as there are no selected commits contributing to this merge.

When given a range of commits to display (e.g. commit1..commit2 or commit2 ^commit1), only display commits in that range that are ancestors of <commit>, descendants of <commit>, or <commit> itself. If no commit is specified, use commit1 (the excluded part of the range) as <commit>. Can be passed multiple times; if so, a commit is included if it is any of the commits given or if it is an ancestor or descendant of one of them.

Commits are included if they are not TREESAME to any parent (though this can be changed, see --sparse below). If the commit was a merge, and it was TREESAME to one parent, follow only that parent. (Even if there are several TREESAME parents, follow only one of them.) Otherwise, follow all parents.

	  .-A---N---O
	 /     /   /
	I---------D

This mode differs from the default in one point: always follow all parents of a merge, even if it is TREESAME to one of them. Even if more than one side of the merge has commits that are included, this does not imply that the merge itself is! In the example, we get

	I  A  B  N  D  O  P  Q

Ordinary commits are only included if they are !TREESAME (though this can be changed, see --sparse below).

	  .-A---M---N---O---P---Q
	 /     /   /   /   /
	I     B   /   D   /
	 \   /   /   /   /
	  `-------------'

Commits that are walked are included if they are not TREESAME to any parent.

All commits that are walked are included.

First, build a history graph in the same way that --full-history with parent rewriting does (see above).

	  .-A---M---N---O
	 /     /       /
	I     B       D
	 \   /       /
	  `---------'

Limit the displayed commits to those which are an ancestor of <commit>, or which are a descendant of <commit>, or are <commit> itself.

	    D---E-------F
	   /     \       \
	  B---C---G---H---I---J
	 /                     \
	A-------K---------------L--M

		E-------F
		 \       \
		  G---H---I---J
			       \
				L--M

		E
		 \
		  G---H---I---J
			       \
				L--M

		K---------------L--M

In addition to the commits shown in the default history, show each merge commit that is not TREESAME to its first parent but is TREESAME to a later parent.

	I---X---R---N

	  .-A---M--.   N
	 /     /    \ /
	I     B      R
	 \   /      /
	  \ /      /
	   `---X--'